![]() When the heating unit operates, the red indicator light will go on. The unit will heat up to set temperature. Set the thermostat dial to the desired temperature.Place the lid on top of the melter and leave it in place as much as possible to conserve energy, speed melting, and the temperature of your wax.Do not let wax fill to the top of the melter and make sure to leave at least half an inch of room. Add desired quantity of wax to the melter’s tank - NO MORE THAN 19lb / 9L.Make sure the lever on the pour spout is in the closed position before adding wax (knob faces to the right when closed).Melter comes with a thermostat sensor that reads temperature from the bottom of the vessel - the thermostat can be set between 122☏ TO 212☏ (temperature is kept within ± 5 ☏). Wax melting time depends on the type of wax and the corresponding melting point. For any medical emergency, please contact 911.Do not leave children unattended, burns might occur.Do not leave your melter unattended while in-use.Note that high heat/overheating may damage the original properties of the wax.Be careful when handling and lifting the lid during use, as the heat can result in burns.Do not use the appliance in areas with extreme temperatures - keep away from direct sunlight and places with high humidity.This appliance is not water-resistant so DO NOT submerge in water or any other liquid.Do not put near objects sensitive to magnetic fields like credit cards.Operate the appliance in areas with sufficient air circulation, avoid overheated areas, and keep away from explosive or highly flammable materials.Do not touch the metal body of the melter heated parts when the appliance is in use.Do not use near chemical plants, petrol stations, fuel storage, or similar places, where an electric discharge could cause a fire.Always use your appliance from a power outlet of the voltage marked on the appliance.Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.It is recommended to remove excess wax and then use a lightly damp, soft cloth with rubbing alcohol to clean residue.To prevent damage to the appliance, do not use household cleaning products.Turn the power off and remove the plug when the appliance is not in use and before cleaning.This product is intended for melting wax for candle making and is not tested for any other use.Do not set the temperature control dials to a temperature higher than the manufacturer's recommended temperature for the wax you are melting.Always use protective eyewear and protective clothing when using the wax melter like these here - pink safety glasses + clear safety goggles.Heat range for thermostat between 122☏ TO 212°Ĭheck out these safety guidelines as you get ready to melt more wax than ever before:.27 liter takes between 2 and 3 1/2 hours to liquify entire melter.9 liter takes between 90 minutes - 2 1/2 hours to liquify entire melter.All makesy wax blends have been tested and approved to be melted in our wax melters at their corresponding melting point.Suitable for most waxes with melting temperatures 50☌ -100☌/ 122☏ -212☏.Stainless steel body and pour spout for easy dispensing.Large 9 liter or 27 liter vessel with lid.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |